4.5" DIESEL JT GLADIATOR LIFT KIT ENFORCER SUSPENSION SYSTEMS
JEEP GLADIATOR JT (Diesel) 4.5” ENFORCER SUSPENSION SYSTEMS
ALL TRIMS: SPORT, OVERLAND, RUBICON, MOJAVE
MOJAVE: Bilstein Shocks not compatible. King Shocks will work.
The EVO MFG 4.5” Jeep Gladiator JT Enforcer Suspension Systems lift and level your 2020+ Jeep Gladiator JT DIESEL 4.5”s.
The JT Enforcer kits are specifically designed and engineered to lift your JL and maintain a performance spring rate, smooth ride quality all while retaining tow capacities.
These kits allow for use of your choice of any aftermarket 2.5-5” lift shock or use of our EVO SPEC tuned 2.5” Remote Reservoir King Shocks.
These kits come with a set of 4.5” lift springs specific to the Jeep Gladiator Diesel and will remove most of the factory rake making your stock truck level.
The EVO MFG 4.5" JT Enforcer Kits are easy to install using normal tools. No drilling or cutting. They require no driveshaft or exhaust modifications. Stock Front and Rear Driveshafts compatible when paired with Packaged Shocks
Simple Bolt on installation. EVO MFG JT Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road.
Overland: With the use of the included Overland Control Arm drop brackets while lifted we maintain factory flat control arm angle alleviating much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. This bracket set is fixtured, welded and powdercoated assemblies, not bolt together bracket pieces for a stronger product. Crush sleeves and hardware included. 100% bolt on design.
Stage 1 kits includes all the fundamental parts to lift your JT 4.5”s.
Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer Front Lower Adjustable Control Arms to allow for caster adjustments.
Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.
Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation.
The included Enforcer arms are manufactured from large diameter, thick wall DOM Steel Tubing for ultimate in strength and longevity both on and off the trail.
These kits require wheel spacers or aftermarket wheels with smaller backspacing.
Front and rear adjustable trackbars to fine tune axle center are included with PLUS “P” kits.
“K” Kits include a set of 4 EVO SPEC Remote Reservoir King Shocks.
FOR 4.5"/6.5" JT Lifts: Front Lower and Rear Upper Adjustable Control Arms and Front & Rear Adjustable Trackbars are required for proper alignment/install.
These components are included with Stage 3 and Stage 4 "PLUS" Kits.
JEEP GLADIATOR JT (Diesel) 4.5” ENFORCER SUSPENSION SYSTEMS
ALL TRIMS: SPORT, OVERLAND, RUBICON, MOJAVE
MOJAVE: Bilstein Shocks not compatible. King Shocks will work.
The EVO MFG 4.5” Jeep Gladiator JT Enforcer Suspension Systems lift and level your 2020+ Jeep Gladiator JT DIESEL 4.5”s.
The JT Enforcer kits are specifically designed and engineered to lift your JL and maintain a performance spring rate, smooth ride quality all while retaining tow capacities.
These kits allow for use of your choice of any aftermarket 2.5-5” lift shock or use of our EVO SPEC tuned 2.5” Remote Reservoir King Shocks.
These kits come with a set of 4.5” lift springs specific to the Jeep Gladiator Diesel and will remove most of the factory rake making your stock truck level.
The EVO MFG 4.5" JT Enforcer Kits are easy to install using normal tools. No drilling or cutting. They require no driveshaft or exhaust modifications. Stock Front and Rear Driveshafts compatible when paired with Packaged Shocks
Simple Bolt on installation. EVO MFG JT Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road.
Overland: With the use of the included Overland Control Arm drop brackets while lifted we maintain factory flat control arm angle alleviating much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. This bracket set is fixtured, welded and powdercoated assemblies, not bolt together bracket pieces for a stronger product. Crush sleeves and hardware included. 100% bolt on design.
Stage 1 kits includes all the fundamental parts to lift your JT 4.5”s.
Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer Front Lower Adjustable Control Arms to allow for caster adjustments.
Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.
Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation.
The included Enforcer arms are manufactured from large diameter, thick wall DOM Steel Tubing for ultimate in strength and longevity both on and off the trail.
These kits require wheel spacers or aftermarket wheels with smaller backspacing.
Front and rear adjustable trackbars to fine tune axle center are included with PLUS “P” kits.
“K” Kits include a set of 4 EVO SPEC Remote Reservoir King Shocks.
FOR 4.5"/6.5" JT Lifts: Front Lower and Rear Upper Adjustable Control Arms and Front & Rear Adjustable Trackbars are required for proper alignment/install.
These components are included with Stage 3 and Stage 4 "PLUS" Kits.
Original: $2,954.00
-65%$2,954.00
$1,033.90Description
JEEP GLADIATOR JT (Diesel) 4.5” ENFORCER SUSPENSION SYSTEMS
ALL TRIMS: SPORT, OVERLAND, RUBICON, MOJAVE
MOJAVE: Bilstein Shocks not compatible. King Shocks will work.
The EVO MFG 4.5” Jeep Gladiator JT Enforcer Suspension Systems lift and level your 2020+ Jeep Gladiator JT DIESEL 4.5”s.
The JT Enforcer kits are specifically designed and engineered to lift your JL and maintain a performance spring rate, smooth ride quality all while retaining tow capacities.
These kits allow for use of your choice of any aftermarket 2.5-5” lift shock or use of our EVO SPEC tuned 2.5” Remote Reservoir King Shocks.
These kits come with a set of 4.5” lift springs specific to the Jeep Gladiator Diesel and will remove most of the factory rake making your stock truck level.
The EVO MFG 4.5" JT Enforcer Kits are easy to install using normal tools. No drilling or cutting. They require no driveshaft or exhaust modifications. Stock Front and Rear Driveshafts compatible when paired with Packaged Shocks
Simple Bolt on installation. EVO MFG JT Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road.
Overland: With the use of the included Overland Control Arm drop brackets while lifted we maintain factory flat control arm angle alleviating much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. This bracket set is fixtured, welded and powdercoated assemblies, not bolt together bracket pieces for a stronger product. Crush sleeves and hardware included. 100% bolt on design.
Stage 1 kits includes all the fundamental parts to lift your JT 4.5”s.
Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer Front Lower Adjustable Control Arms to allow for caster adjustments.
Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.
Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation.
The included Enforcer arms are manufactured from large diameter, thick wall DOM Steel Tubing for ultimate in strength and longevity both on and off the trail.
These kits require wheel spacers or aftermarket wheels with smaller backspacing.
Front and rear adjustable trackbars to fine tune axle center are included with PLUS “P” kits.
“K” Kits include a set of 4 EVO SPEC Remote Reservoir King Shocks.
FOR 4.5"/6.5" JT Lifts: Front Lower and Rear Upper Adjustable Control Arms and Front & Rear Adjustable Trackbars are required for proper alignment/install.
These components are included with Stage 3 and Stage 4 "PLUS" Kits.
